Texas Instruments, Inc.
8505 Forest Lane - MS 8710
Dallas, TX 75243

Archive Name:  	6456894_ADS8371EVM_PCB.zip
	

Please keep all logo and date code information away from silkscreened 
part numbers.  Logo and date code information should be placed on solder
side of PCB whenever possible.

Gerber Format is RS274X, 2.3, Absolute, Leading Zeros supressed.
NC Drill Format is Excellon, 2.4, Absolute, Leading Zeros supressed.

Gerber files are identified by extensions starting with the letter "G".
NC Drill report files have the extension "DRR".
NC Drill Data are in EIA format with the extention "DRL".
ASCII version NC Drill files are available in the *.TXT file.

Layer Stack up information is at lower left hand corner.
Topoverlay file is xxxx.GTO
TOPLAYER file is XXXXX.GTL
Internal Plane 1 file is xxxxx.GP2
Internal Plane 2 file is xxxxx.GP1
BOTTOMLAYER file is XXX.GBL
BOTTOMOverlay file is xxxx.GBO

Please refer all questions reguarding this file to:

	Lijoy Philipose
	Texas Instruments
	Phone: (214) 480-3405
	E-Mail: l-philipose@ti.com